Originally Posted by CurrentDude
I'm not into FPV yet but thinking about it...
I'd like to see your FPV set ups; plz can you point out which is the specific post(s) I need to look...
We may be going off topic, but the FPV set-up was originally bought for the TwinStar, if that helps...
Basically I got the $69, 200mW, 900MHz HobbyKing combo with VTx, VRx and 520TVL Sony cam. I possibly switched the lens for a 2.8mm to get a bit wider angle of view, but I can't really remember. I run camera and Vx of a separate 470mAh 3S LiPo, but I have also just used the plane battery. No real noise issues because of that. I have made a set of simple V-antennaes to save weigth and get a bit more gain.
The FatShark Dominators are my most expensive component, and they come with a cable harness that easily hooks up with the HK VRx and a 3S LiPo.
I have set the VTx and VRx up to ch 3, which is 1040MHz and a seemingly peaceful slot in our local ether.
I use a 40MHz Graupner transmitter and receiver, which is also very rarely used.