Velocity/edf hobbies 2950kv 4.0mm 70mm
View Single Post
Oct 06, 2012
, 01:39 PM
United States, CA, Santa Clarita
Joined Aug 2009
It's for a 6s setup in a 3-6 bladed fan. The added weight is a benefit in it's mass and ability to shed heat.
Yes, your an "energy star" EDF'r eric,
but some folks want 1900+w. (with 5-6+ lbs thrust)
The 61.5 mm long MEGAs and the HET 1W-40's are being used there as well.
Long can, low kv motors are being used by the CS guys. so the rotor doesn't burn up the motor. at lower power levels (<1300w)
Latest blog entry:
Updated blog Oct 2014