Thread: Discussion Club Twistaholic
View Single Post
Old Oct 06, 2012, 01:25 PM
waynemia is offline
Find More Posts by waynemia
A trail of smoke is GOOD!
waynemia's Avatar
USA, TX, Springtown
Joined May 2008
7,233 Posts
Quote:
Originally Posted by DaOldGuy View Post
I am hoping there was a typo in this line someplace.

There is no advantage I know of to stalling a servo or getting "Blow Back" of a surface. Either of these events happening causes very high amp draw and can cause brown outs / shorten a servo life dramatically.

Speed and Centering is a high priority, at least to me. Its like 72Mhz verses 2.4. With 72 the transmission is slower so often you are "chasing" the control, doing things in advance to comp for the latency. The next step is to take that latency of of the servo so slight move happen more real time. Hovering is a good example of fast minor corrections. If you are always a half move behind the needed correction, the chase is on.
I am saying if your existing servos can't hold the deflection, then stronger servos are worth it and have an advantage.
waynemia is offline Find More Posts by waynemia
Reply With Quote