View Single Post
Old Oct 03, 2012, 07:50 AM
mono is online now
Find More Posts by mono
⤤ ⤳ ⤴ ⇲
mono's Avatar
Joined Aug 2008
1,519 Posts
I not sure those 1300 Turnigys will go in there either, they are 22mm thick.
When looking through my battery collection for one which would fit it (I got the BNF version without the battery), I found an RC Smart one that looked perfect. Measured it with calipers, 19.6mm thick all the way along, but, it would not slide more than a short distance into the tray.
The tray was actually distorting a little as it was. So I think 18-19mm maximum thickness to avoid problems.
One of the members posted the internal measurements of the tray a while back... 66mm X 37mm X 19mm (height). You can have a batt longer than 66mm though, as this Turnigy has been used...
http://www.hobbyking.com/hobbyking/s...dproduct=11901
mono is online now Find More Posts by mono
Reply With Quote