Thread: Discussion Club Twistaholic
View Single Post
Old Oct 03, 2012, 01:58 AM
3DNater is online now
Find More Posts by 3DNater
3d NOOBular
3DNater's Avatar
United States, NV, Las Vegas
Joined Aug 2010
9,122 Posts
Originally Posted by waynemia View Post
All you electric dudes -

I need to get the clip ring off the back of a motor so I can pull the bell. I don't know how to get these off without destroying them. This is not an E clip. It is like a ring clip but has two hooks rather than holes. Does anyone have a secret method to remove and re-install these they could share so it is no longer a secret??
If it is what I think it is I just took one off tonight. just use two flat head screwdrivers and carefully press on each side together. It will move back enough to get a small screwdriver between the shaft and the clip and you can gently pry it off being careful not to lose it.

Well, I got the twist rdy to fly. That included replacing servo extensions, mounting the esc on the OUTSIDE of the fuse, trying a fix on the damaged motor (working for now) and mounting the motor. Also had to put a tx in it. The 6s twist is RTF for a HOEDOWN!
3DNater is online now Find More Posts by 3DNater
Reply With Quote