View Single Post
Old Oct 02, 2012, 06:45 AM
brinnus is offline
Find More Posts by brinnus
Registered User
Joined Oct 2012
12 Posts
Help, I have the latest release Turnigy 9x from Hobbyking, it is as it comes out of the factory. I have built a multirotor X shape and have the Naza MC. I am using Turnigy 25A ESC's (TY-P1). All the motors arm and calibrate when connected direct to the Rx but fail to arm through Naza. I have copied various configurations posted on the Internet to no avail but I think that as I can select "A" and "M" modes it should arm the motors. Apart from possibly having a faulty Naza which I very much doubt is it possible that my ESC's are incompatable with Naza. Neither Dji nor Hobbyking can tell me. So here I am. If anybody has this 9x/Naza setup I would appreciate a copy of your complete TX configuration.
brinnus is offline Find More Posts by brinnus
Reply With Quote