Originally Posted by Cheese5
Sounds like your throttle end points are off. Did you try calibrating the esc?
Exactly---It's NOT an ESC problem!!!..
In my last post I suggested that you power everything off...Turn on the power to the TX with the throttle full and the trim low...Now, power on the ESC---You should hear a series of beeps...These are the high throttle conformation beeps..
After this series there will a brief pause before more beeps...(The latter beeps means that you are entering the programming mode)...After the first series of beeps stop move the throttle to the fully down (low) position---You will hear another series of beeps...This is the low throttle conformation...You should now be set to go...