View Single Post
Old Oct 01, 2012, 06:30 PM
JumpySticks is offline
Find More Posts by JumpySticks
Drifting off the reservation..
JumpySticks's Avatar
USA, LA, Broussard
Joined Jan 2011
2,296 Posts
Quote:
Originally Posted by moparherb View Post
Here is the mix settings so that you can use throttle hold switch to disable your electric motor on electric airplanes. I know this works on DX7, DX8 and JR 9303 and JR 9503. I can see no reason it would not work on DX6I but you will have to try it using a different mix:

I use mix 3
make it a THRO to THRO mix
POS 0 Should be 0% in both Positions
POS 1 make both settings -100% that is minus 100%
you do that by changing the position of throttle stick
Set Offset to -200 that is minus 200
make sure that "mix" is set to position 1
Leave THRO STK Inhibited (INH)

Now when you put the throttle hold switch in position 1 (toward you) the motor will be disabled. Hope this helps and if you have any questions please ask.
This is the original moparherb post for throttle switch. For the DX7, mine would not go to -200 offset, so I just went to the max negative offset of -125 and it worked. Then I mixed the flaps to the throttle stick when the switch is in Position 0.

Oh, and as always, best to remove prop or disable motor prior to messing with throttle mixes.
JumpySticks is offline Find More Posts by JumpySticks
Reply With Quote