View Single Post
Old Sep 30, 2012, 05:19 PM
jetpackninja is offline
Find More Posts by jetpackninja
Planes in flames,,,
jetpackninja's Avatar
Gravity Sucks
Joined Aug 2010
3,571 Posts
+1 on ttabbal comments

I won't ever do any more with the radio shack wire.
I just did the first one with the MD wire and it bench tested at 300 watts.
I have also found that I need to set the esc timing setting to high with this setup.
Keep the bearings lubed (I got a bottle of bearing lube from the LHS)
The motor can get quite hot if you do a lot of full throttle, but what makes it work is the high temp rating of the wire insulation. Good luck and lots of info can be found right here in this thread if you have time to do some reading.
jetpackninja is offline Find More Posts by jetpackninja
Reply With Quote