Originally Posted by verticalspark
time to bump it up a couple cells?
I bought the kit for the 1200 Popwing and put a 400 SloFly on it from Heads Up RC. I had a 2200 Mah 3 cell with an APC 9x5 prop on it. It was a slow flyer for sure (hence its name). but it was very stable. I guess a .10 motor with a high KV would be interesting as it needs a high KV to be interesting to you young fliers. A small prop on that .10 motor with 3 cells might be enough but if you use 4 cells check the amperage and CG before you go for a test flight. The CG was hard to get with the setup I flew it with and a heavy motor and battery might make the CG hard to acheive. Good Luck!