Thread: Help! Spoilers
View Single Post
Old Sep 28, 2012, 09:07 PM
VegasRay is online now
Find More Posts by VegasRay
VegasRay
USA, NV, Las Vegas
Joined Oct 2005
244 Posts
E/Z Spoiler Linkage

FF - I think I have the fix for your spoiler setup. First move the nylon horn back as near the trailing edge of the spoiler as possible. Just leave enough room for the spoiler to close down completely. You might need to cut down the length of the nylon horn - hard to tell from your pictures. Next you MUST move the servo as far FORWARD as possible - right up to the back of the spar. That's why I cut off the servo mounting ears/lugs. Using your transmitter, adjust the servo so the servo arm is pointing at the nylon horn when the transmitter stick is fully UP (spoiler closed). Move the stick about half way down then slid your wire thru all three links but use only one set screw - in any one of those three. You might need to lengthen or shorten the wire to clear the spar when the spoiler is closed.

That should give you a very nice spoiler operation.

Ray
VegasRay is online now Find More Posts by VegasRay
Reply With Quote