Originally Posted by Haych
Im starting to wonder if its the RCTimer ESC (pre flashed with SimonK F/W) im using... Has this been noticed previously?
Using flashed ESC's on mine and still get the beeps with no motor spinning during calibration.
TX at full Throttle, connect battery and hold buttons 1 & 4 down, get beep then lower throttle to min, get another beep, then switch off.
Have you checked on Rx Test that throttle is operating in the correct sense ie 0 at min throt and 100 plus at full throt.
If using V1.0 you have to have butoons down when connecting battery.