Thread: Discussion HighVoltage servos for FS3
View Single Post
Old Sep 25, 2012, 02:33 AM
isoaritfirst is offline
Find More Posts by isoaritfirst
isoaritfirst
isoaritfirst's Avatar
Not a Brummie/but close
Joined Sep 2005
1,409 Posts
See the FS4 build thread - I used Sanwa HV. ALso used them in my AlliaJ.
Running off Hyperion LiFe 2100 packs.

Also in the FS4 thread see how I made the 2100 pack smaller. I have also installed the same pack in my FS3 - currently that has 3150 in wings and Graupners in the fus. The fus servos are protected with MKS individual in line regulators. The 3150 wing servos (FS3) are on longer wires and plugs which may drop V v slightly and seem to be a robust servo so taking a chance here.
The MKS regulators also work as a fuse on each line so it is worth considering installing them on every surface, they may just save your model if one servo fails.
My Needle DSL has them throughout.
Of course you are adding another component but with individual ones at least one failure may not be terminal.
isoaritfirst is offline Find More Posts by isoaritfirst
Reply With Quote