View Single Post
Old Sep 24, 2012, 10:31 PM
SDSURFnGLIDE is online now
Find More Posts by SDSURFnGLIDE
Multi rotors=No Paycheck left
SDSURFnGLIDE's Avatar
United States, CA, San Diego
Joined Apr 2011
3,812 Posts
Quote:
Originally Posted by RobDawg View Post
I need some help with my Quad. Here is a video explaining the problems I am having. I am posting this to see if anyone has any ideas for me. The copter is just flipping over. I am assuming that there is a problem with the FC at this point. I have done the throttle calibration where you put the throttle all the way up, turn the copter on, and then pull the throttle down. Here is my setup:

HT-FPV frame
DJI NAZA Flight Controller
NTM 28-26 1000kv Motors
DJI 30A ESCs
Hoverthings power dist. board
TX/RX Turnigy 9X
Battery: Nano tech 3300 mAh 35-70C

If you have any questions, please let me know. Sorry the audio is not synced up.

http://www.youtube.com/watch?v=AGfU0mHooV8&feature=plcp

Your Naza is backwards...the motor Ports need to face forward...flip it around
SDSURFnGLIDE is online now Find More Posts by SDSURFnGLIDE
Reply With Quote