View Single Post
Old Sep 24, 2012, 02:18 PM
erh7771 is offline
Find More Posts by erh7771
Registered User
United States, TX, Grand Prairie
Joined Nov 2005
6,424 Posts
Quote:
Originally Posted by A10pilot View Post
Thougth I would post some photos of my newly completed Falcon 120. This plane replaces my old "stock" Falcon 120 which I lost to a midair in May 2012.

I decided to strip the covering off and I glassed the wings, tail and booms with 1/2oz cloth applied with System 3 Clear coat epoxy. I used PPG epoxy primer and all of the colors on the plane are PPG base coat/clear coat. Plane has my old Dynamax/Scoprion 4035-630 KV motor with CC 160 amps esc. Plane flies on 12s 6000 mah packs. AUW is 15 lbs 4 oz. Fan system puts out 5 kw at 117 amps. Efflux is 203 mph. Tail pipe is 12" long and exhaust diamater is 3.75". Just for fun, I added some wing fences for effect.

Hope you like it.
Thanks,
Ed
How much time did it take you to paint it like this?

I first thought it was a turbine with a lot of packs in it

Very quailty work...

Regards
erh7771 is offline Find More Posts by erh7771
RCG Plus Member
Reply With Quote