Thread: New Product Fancy Foam MX2 by RJ Gritter
View Single Post
Old Sep 24, 2012, 09:20 AM
roberted5 is offline
Find More Posts by roberted5
Registered User
Joined Nov 2009
306 Posts
Quote:
Originally Posted by hpapilot View Post
Yes, they sure do give you enough throw, however you really should use an offset arm such as the ones from Radical RC to get proper geometry there. I'm not sure how you could get 90deg angles with a straight arm... the control horns on the ailerons are much further apart than the length of the servo arm that comes with the S3114. I use the RadicalRC .625" offset arm and typically use the second hole from the bottom. This gives me proper aileron differential (zero).
Thanks for your help.
That's just it you get right angles from center of spline to push-rod line by using the last hole on the S3114's longest arm.That will do away with any differential.
Here's a picture it descibes it beter than words.I'm gettig the same geometery by using the last hole on the S3114's.
roberted5 is offline Find More Posts by roberted5
Reply With Quote