Originally Posted by Multor
all the esc outputs+ have continuity
ive had problems when using unequal power draw on the escs i onced crashed because one esc provides too much power even its linear it crashed because i disconnected 1 of the red wires and tried to power my HD wing cam xD
but yes basically like that picture
but here is i think neater and simpler solution, thou i havent plugged it in yet, nebstress does yours work?
Yes it does work on mine!
In your photo; have you checked that there is power from that pin using a Multimeter? if there is then it should work OK (I would use a ground as well).
Great to hear that your Quad is flying well
With the PID's between your 550 & 450 Quads; very basically, the smaller the Quad/frame the lower the PIDs need to be.