View Single Post
Old Jun 15, 2004, 03:50 PM
AmpAce is offline
Find More Posts by AmpAce
Registered User
AmpAce's Avatar
North by Northwest
Joined Nov 2003
2,426 Posts
My humble apologies!! The error with the wing parts described in Post #12 is my mistake. The W8 part sits at more of an angle than I thought, thus it needs to be wider (taller) to take up the space. The W7 is cut a little too narrow, but nothing that a little sanding won't cure.

Another thing to watch out for---the triangular trailing edges do have a 90 degree angle between their leading edge and one of the flat sides, but not the other, so they can be installed upside down. When this is done the fit between the back of the aileron ribs and the leading edge of the trailing edge is poor. Ask me how I know! These parts are so small that this angle is hard to see.


AmpAce is offline Find More Posts by AmpAce
Reply With Quote