Thread: Build Log Flying Foam's Mothership EP
View Single Post
Old Sep 17, 2012, 07:49 PM
waynemia is offline
Find More Posts by waynemia
A trail of smoke is GOOD!
waynemia's Avatar
USA, TX, Springtown
Joined May 2008
7,233 Posts
Thanks for the links. I plan to incorporate the motor mount with a lateral spar. I was looking at the plane last night and discussing with a friend and I think I have a good plan that will eliminate flex along the center line.

Thanks for the information Bob. I prefer the pusher as there is less opportunity to damage the motor and the clear view ahead. I have experienced the climb with power issue and can mix that out with down elevator mixed to the throttle. It takes a couple of test flights but I can get 90% of the pitch on throttle out that way.

I have a couple of other projects this week but hope to start by next week.

Congrats JS. I am looking forward to the first flights on this one.

Here is a video of my Zijji flying from this weekend.

Trick RC Zijji Flying Wing On-board Video (11 min 13 sec)

This video is of the smaller homemade wing we wire cut from Lowe's Foam.

bwing1_0002.wmv (2 min 16 sec)

Thanks again for your participation.
waynemia is offline Find More Posts by waynemia
Reply With Quote