Thread: Discussion RadJet from the KING!
View Single Post
Old Sep 17, 2012, 12:46 PM
Cid156 is online now
Find More Posts by Cid156
Registered User
Switzerland
Joined Sep 2008
1,068 Posts
Quote:
Originally Posted by Kurt View Post
Yep, it's ridiculously skinny, especially for a pusher.
Perfect excuse to put one of these in there!
http://www.hobbyking.com/hobbyking/s...dProduct=12919
As long as you want to stay with 3S batteries, which for me is fast enough.



Sweet video!

I had a pretty dramatic crash this weekend. Was getting too confident, making WOT low speed passes, when towards the end of the pack a wing clipped the tall grass and she went spinning and rolling along the ground. Threw the canopy off (despite a strong rubber band) and the battery ejected, ripping the positive lead right out of the pack. Looking inside the battery end it's going to be too touchy to re-solder, so I'll just throw it away and order another 1300mAh 3S 45-90c Nano-tech to replace it. Great battery, the wiring is just not designed to withstand many g's of force :/
Didn't break the vert stabs or (several times glued and CF reinforced nose), but did rip both wing-tip tanks off so I just cleaned up the edges with a blade and she flies as good as new.
Still get a big thrill ripping around with the Radjet!
I have the same motor in stock. I am wondering if it will be fast enough... maybe in a 4s with a 4.7x4.7

I should try before ordering the 2836 XXXXkv
Cid156 is online now Find More Posts by Cid156
RCG Plus Member
Latest blog entry: Micro quad Wsk 110
Reply With Quote