View Single Post
Old Sep 15, 2012, 12:02 AM
jfdpl686 is offline
Find More Posts by jfdpl686
Registered User
Joined Aug 2012
42 Posts
Isn't it something? I've been researching about the trims. When you set it to 0/20 then the mechanical trim don't work. My theory is that the value given is the number of steps each time you move the trim, so if you move it once to the right, then your trim is 4, twice is 8 while if you set 1/20, then your trim advance one at a time. Like the Tunirgy 9x.

I will research more.

I used the subtrim in my LB and now I get it to hover almost perfect, but if it's not advisable, I will remove it.

I'm new at this and now following all your gides, I have the V911, LB and my challenge is the mini cp which I just finish setting and have to try.

I really appreciate all your post helping people learning like myself.

A big thank you to you!
jfdpl686 is offline Find More Posts by jfdpl686
Reply With Quote