View Single Post
Old Sep 13, 2012, 03:24 PM
nerys is offline
Find More Posts by nerys
Grrr :-)
nerys's Avatar
Levittown PA 19057
Joined Aug 2006
448 Posts
Tom hit it. the best solution is to reduce the vibration to begin with.

the second best is MASS. you don't want the cam mounted "loose" you want it mounted tight. REALLY tight. the more mas you can "link" with the camera directly and physically the more energy it takes to "vibrate" it takes very little energy (relatively speaking) to vibrate the camera but a whole lot more energy to vibrate the "entire vehicle"

if you have a RESONANT vibration (ie where its not all the time only under specific conditions) then damping materials can help by altering the resonant frequency to be in a range that you won't operate it.
nerys is offline Find More Posts by nerys