oh one thing after another
now find that with my Savox servo I cant get much steering movement with the suspension is topped out, the servo horn hits inside the wishbone at full droop, only get about half travel
think its maybe not helped by the slightly offset horn mounting on the low profile serve
back to the slightly less good full size servo and see what its like then.
aha just noticed the height difference from mounting points to the actual servo output shaft, probably 5-6mm different.
will try packing out the height and longer screws
if I pack it out to the right height then theres no chance of it clearing the wishbones
need to do some thinking about this one