Thread: Discussion RadJet from the KING!
View Single Post
Old Sep 09, 2012, 04:47 PM
headlessagain is offline
Find More Posts by headlessagain
Reap the wild wind
headlessagain's Avatar
Bristol,UK
Joined Feb 2007
5,291 Posts
Firstly sand down all joints and lightly score and prick so that the glues has something to grip onto. Re glues, have a look at this HK thread http://www.hobbyking.com/hobbyking/f...KW=glue%2C+epo. I used HK own foam glue on my HK Parkjet http://www.hobbyking.com/hobbyking/s...rge_100ml.html and worked really well. It's similar to UHU Por. You might be able to use Evo-stik timebond or their contact adhesive but test a small area to ensure your model doesn't vanish in front of your eyes.
Multiplex suggest their own Zacki Elapor Glue for their models. It's a non-foam safe CA glue and certainly held the nose cone on my powered Blizzard. Some say just use medium CA with kicker and others consider CA to be too brittle
Andy
headlessagain is offline Find More Posts by headlessagain
Last edited by headlessagain; Sep 10, 2012 at 01:00 AM.
Reply With Quote