Announcing the Guardian 2D/3D Stabilizer
View Single Post
Sep 08, 2012
, 10:24 PM
United States, MI, Clarkston
Joined Apr 2007
Sorry about the blurry image. Took a couple more.
Picture 1 shows left inner side of the USB receptacle and there is no interference (tab) to prevent the USB cable to be inserted.
Picture 2 shows an interference (tab) that prevents the USB cable to be inserted fully. Looking a little closer to the outer area at the right side of the receptacle appears to be a blob of some sort that lines up with the interfering item immediately inside the receptacle. Does not look like solder, but may be as there are 2 open slots (on each side of the receptacle) and the right side exterior looks like a solder blob at the attachment to the pc board.
Does this show up better?
Left click on these pictures to enlarge them for better viewing.
View all Images in thread
Pict 1 - left inner side is clear
Pict 2 - right inner side has a protuberance that prevents USB cable insertion