Thread: Discussion want to build a 24 inch plane
View Single Post
Old Sep 08, 2012, 05:39 PM
jackerbes is offline
Find More Posts by jackerbes
Jack
USA, ME, Ellsworth
Joined May 2008
18,087 Posts
Quote:
Originally Posted by romanxdsouza View Post
what u feel about this rudder made som changes in diagram jack
We started talking about you building for a 24" wing span. You have mentioned a 48 a couple of times too. Is the plan changed now, it is for you to build a 48" wingspan now?

The reason I ask is because the vertical stabilizer and rudder you show would be maybe a little small for a 48" build. As the span gets wider the fuselage gets longer and the vertical and horizontal stablilizers get larger too. The attached drawing is what I used for the 48" and 56" wings I made for my KFoenix Stick. That worked well on both of those. I prefer to have them over sized to under sized.

Quote:
Originally Posted by romanxdsouza View Post
tht pic is not my plane its an example
OK, I thought it was yours.

The foam you will use, do you have it yet? If so, is it in sheets and how thick is it? And if it has a name (EPP, Depron, etc.) what is it?

Jack
jackerbes is offline Find More Posts by jackerbes