Thread: Discussion New: Multiplex Acro Master
View Single Post
Old Sep 04, 2012, 03:37 AM
4446 is offline
Find More Posts by 4446
Registered User
Greece, Crete, Chania
Joined Jul 2010
46 Posts
setup motor-prop

Hi guys,

there seem to be plenty of info but here it goes...another motor/prop question...

I picked up the acromaster new and is all setup with
motor A30 10xl v2 (177grams)
ESC TGY plush 40amp
batteries 2200mah 3S turnigys 30-45C
AUW is 1100grams

(the motor was the only decent thing at LHS)

I've tried several props but the run times are really unrealistic/silly (too little). the motor can handle pretty much every large size prop. The only thing I can come up with to keep this setup is to run x2 in parallel of the above bats with a 12x6 APC slowfly to keep the times a bit above 10mins (according to propCalc).

However the AUW will be 1300grams. Is this plenty heavy for the AM or is it still acceptable performance wise..? the thrust/weight ratio is still pretty good but what is a good value?

Any suggestions?

I've also thought of using the 4S 5000mah from my buggy which will bring the AUW at 1400grams increase run times even with a 13x6.5 and give more than 600watts and t/w ratio of more than 2.3

I'm still a noob in acro, but give me some height and I can do pretty much everything.

HEAVY HEAVY HEAVY....
4446 is offline Find More Posts by 4446
Reply With Quote