Originally Posted by Wind_of_Change
If something is rubbing inside the bell, you probably have a loose wind of wire on a stator that's rubbing on the magnets. If it's grinding, you probably a loose magnet, which could be easily glued back in by removing the clamp on the bell, removing the bell, and gluing the magnet back in with a little bit of epoxy. You'll have to describe the noise.
I took off the c-clip, and pulled the bell off the stator. Checked all the windings and non appear to be out of bounds. Checked the bell, and pushed on the magnets and non appear to be loose. They too don't look out of place and aren't sticking out the bottom of the bell or on a weird angle.