View Single Post
Old Aug 26, 2012, 02:52 AM
mgbolts is offline
Find More Posts by mgbolts
Registered User
Joined Apr 2012
37 Posts
Servo Installation

I plan to fit the servos as per the picture below.

There is no frame, the unsanded servo is merely glued down. The servo will be braced by the Fu Fix bearing glued to both top and bottom skins. In addition, a CF strip (1mm x 8mm x 60mm) laid across the servo and glued to the inside of the bottom skin.

The end result should be a rigid box frame structure surrounding the servo, locking the skins and minimizing flex. The servo arm is also well supported with the external bearing minimizing movement and wear.
mgbolts is offline Find More Posts by mgbolts
Last edited by mgbolts; Aug 26, 2012 at 10:01 AM.
Reply With Quote