View Single Post
Old Aug 18, 2012, 04:20 AM
Eddfoo is offline
Find More Posts by Eddfoo
Registered User
Malaysia, Penang, George Town
Joined Jan 2012
66 Posts
Hunter Vtail with KK 5.5e/Mems Upgrade 16j FW

Hi All,
Very happy with KK 5.5e and Mike's 16j Vtail FW. Here is a short Video of the Vtail, and if any one is interested, here is my setup.

Frame : Hunter Vtail (500mm) (My rc build.com)
FB : KK 5.5e with Mems Upgrade ( Multircshop )
FW : Mike Barton XXcontroller 16j Vtail
Motors: Turnigy D2830/11 1100KV
Props : Front: GWS EP 1047 Rear: Gemfan EP0945
ESC : Hobbyking F30A SimonK Flashed

FW Setting:

Roll Gain P=16% I= 18%
Pitch P=16% I= 18%
Yaw P=22.5% I= 22.5%
Acc Gain = 25%

Tx/Rx Flysky TH9xB/HK-TR6A V2 (Stock FW)

Throttle Curve : 0, 50,60,70,100
D/R & Expo
Rudd : 80/30
Elev : 85/20
Aile : 85/20

Waking the Hunter Vtail.mp4 (4 min 9 sec)


With above setting , I managed to reduced the wobbling on the roll axis, however I find the Vtail is a bit sensitive. Will fine tune it more later.
Any comment to make the vtail more stable is welcomed.
Thanks.
Eddie
Eddfoo is offline Find More Posts by Eddfoo
Last edited by Eddfoo; Aug 18, 2012 at 04:42 AM.
Reply With Quote