View Single Post
Old Aug 15, 2012, 08:35 PM
nickelbn1 is offline
Find More Posts by nickelbn1
fly and then fly some more!
nickelbn1's Avatar
Springdale, AR
Joined Dec 2006
2,199 Posts
Quote:
Originally Posted by chopper62 View Post
At field testing. Up wind down wind side wind at no throttle and at wot. ... no right wing drop.
sooo.....how are you liking this plane overall then chopper? happy with it?

ok, just did some more measurements and noticed something else. when I posted that picture earlier today showing that the elevator stab was not lined up with the wing, I assumed that the stab was not level, when in fact, when I just measured the stab is level to the ground and in fact the wing is not. I measured right up against the fuse at the back of the wing and where the right wing comes out of the fuse, it is higher by around 1/16 of an inch to an 1/8 of an inch then where the left wing comes out. that is why when I look from the back down to the wing, they are not level with each other. I believe the hole cut for the wing is not level with the fuse.
nickelbn1 is offline Find More Posts by nickelbn1
Last edited by nickelbn1; Aug 15, 2012 at 08:44 PM.
Reply With Quote