Thread: Discussion TechOne EPO Katana
View Single Post
Old Aug 15, 2012, 05:03 PM
queadlunnrau is offline
Find More Posts by queadlunnrau
Luck is my skill
queadlunnrau's Avatar
United States, WA, Seattle
Joined Jun 2009
1,289 Posts
RCAV8T0R,

Not sure how the Piaget is setup, but the Katana has a seperate servo for each aileron and on my DX7 I have it setup for flaperons so each servo is on a seperate channel so I can sub trim each aileron servo.

As for the CF braces, they are cake on this bird, only 8 to worry about and 4 of them just line up to a groove and you glue them in. The fuse and wings have a large CF brace installed inside already, this is nice because on the Venus the fiberglass braces were on the side and always unglued on tough landings.

I got the kit with motor, no servos nor ESC. She was a quick build, easily under and hour with installing servo's. Though I took my time using Chinese EPO foam glue and waiting for it to cure on each glued part before moving on.

I am getting a little coupling on a KE, but it's prolly my CG is off since I don't fly with the landing gear and with lighter 1000mAh 3s Nano-techs, other than that she does everything I input and does it well.
queadlunnrau is offline Find More Posts by queadlunnrau
Reply With Quote