Thread: Discussion TopFlite mini Contender EP ?
View Single Post
Old Aug 14, 2012, 06:16 PM
max-nix is offline
Find More Posts by max-nix
Registered User
max-nix's Avatar
USA, MO, Salem
Joined Jan 2005
79 Posts
Contender Equipment

I plan on using a Super Tigre 10 motor. It will require some motor mount mods.

For servos I obtained 4 Towerpro SG92R from HeadsUpRC.com @ $4.95 ea.
--------------------------------------------------------------------------
Towerpro SG92R Specifications:
The Towerpro 9g SG92R High Torque Sub Micro Servo is the same size and weight as the popular Tower Pro SG90, but features carbon fiber gears and control arms -- and about 40% more torque. This is a good choice for many park flyers,

Dimensions (L x W x H) = 0.91 x 0.48 x 1.14 inch (23.0 x 12.2 x 29 mm)
Weight = 0.32 ounces (9 grams)
Weight with wire and connecter = 0.37 ounce (10.6 grams)
Stall Torque at 4.8 volts = 30.5 oz/in (2.2 kg/cm)
Operating Voltage = 4.0 to 6.0 volts
Operating Speed at 4.8 volts (no load) = 0.10 sec/ 60 degrees

Connector Wire Length = 9.75 inches (247.65mm)
Universal "S" type connector fits most receivers
max-nix is offline Find More Posts by max-nix
Reply With Quote