Originally Posted by bcamphaus
I just want to add that I also had this happen on two out of four servos. One of them is actually completely shot even after pushing the motor up. It spins all the way right or left without stopping until reaching the end or back to center. I also had the rx on with the rudder and elevator connected and there were a couple times in five minutes when the rudder spazzed out for a second (as if I had bumped the tx). I don't think I want to fly with these servos at all, I just don't trust them
This was going to be used on a 3dhs 41 edge...
I'm guessing your motor slipped just enough to strip the pinion and/or the first gear. Anyways, they seem to be hit or miss...
I got a D770 to test as a potential HV option.