View Single Post
Old Aug 10, 2012, 08:03 AM
RHTizzy is online now
Find More Posts by RHTizzy
Registered User
RHTizzy's Avatar
The Netherlands, NH, Bussum
Joined Feb 2012
207 Posts
Build Log
My first quad - Crius AIOP & RM450 frame


RM450 Kit
  • Package:
  • Wheelbase: 17.7in/450mm
  • Weight: 0.65lb/282g(Appr)
  • Made by advanced engineering material, super strong & smooth.
  • Black color
Crius All in one Pro




  • Features:
  • Supported MegaPirateNG and MultiWii firmware
  • Up to 8-axis motor output
  • 8 input channels for standard receiver
  • 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry
  • 2 servos output for PITCH and ROLL gimbal system
  • A servo output to trigger a camera button
  • 6 Analog output for extend device
  • An I2C port for extend sensor or device
  • Separate 3.3V and 5V LDO voltage regulator
  • ATMega 2560 Microcontroller
  • MPU6050 6 axis gyro/accel with Motion Processing Unit
  • HMC5883L 3-axis digital magnetometer
  • MS5611-01BA01 highprecision altimeter
  • FT232RQ USB-UART chip and Micro USB receptacle
  • On board logic level converter
  • Match the standard of RoHS
  • Flight mode for Multiwii
  • One of the following basic mode
  • Acro
  • Level
  • Alt Hold
  • Head Lock
  • Optional mode
  • HeadFree (CareFree)
  • GPS Hold (Need GPS receiver or Extend Board)
  • GPS Back to home position (Need GPS receiver or Extend Board)
  • Flight mode for MegaPirate
  • Acro
  • Alt Hold
  • Simple
  • Loiter (uses GPS)
  • Guided (uses GPS)
  • Position (uses GPS)
  • Circle (uses GPS)
  • RTL (uses GPS)
  • Auto(uses GPS)
  • Follow Me(uses GPS)
  • Input power selection
  • One of the following ways
  • Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed.
  • Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed.
  • When using Extend Board, AIO PRO must be powered from the extend power port.
  • Other
  • Dimension: 50mm x 50mm
  • Height: 11.6mm
  • Weight: 14.2g
  • Fixing hole spacing: 45mm
  • Hole diameter: 3mm
  • Package content
  • AIO PRO FC x 1
  • 3Pin to 1Pin x 3 cable 100mm x 3
  • 3Pin to 3Pin cable 100mm x 1
  • Molex 1.25mm 4Pin cable 100mm x1
  • Molex 1.25mm 6Pin cable 100mm x2
  • Molex 1.25mm 8Pin cable 100mm x1
RHTizzy is online now Find More Posts by RHTizzy
Last edited by RHTizzy; Jan 08, 2013 at 11:56 AM.
Reply With Quote