Thread: Discussion MiniMag from Multiplex
View Single Post
Old Aug 06, 2012, 09:17 AM
mike_o is offline
Find More Posts by mike_o
Registered User
mike_o's Avatar
Denmark, Nærum
Joined Jan 2012
2,101 Posts
Originally Posted by laurentjeuxlille View Post
Hi to you, happy owners of the minimag,

i have the motor set from multiplex with the permax 2830-1100 motor, and i would like to upgrade it with this one that seems to have tyhe same diameter :

IBM 2217 1120 Kv :

- KV: 1120 KV (rpm/V)

- Power : 336W

- Alim: 2-4 Li-Po

- Courant max: 23.2A

- Diamètre axe: 4mm

- Dimensions: diam 28mm, Long 36mm

- Poids: 70g

It has more watts, so i guess more power than the permax.

Will my minimag fly faster ?

Thx to you
All other things equal, it will have only marginally more RPMs, so difference would be very small. But run at with a higher pitch prop 8x6 and 4S, then you'll need binoculars to spot the MM after a few seconds....

Still, I wouldn't do it. That is not what the MM is about. And all that speed would only worsen the wing incident issue. Perhaps better get a FunJet?
mike_o is offline Find More Posts by mike_o
Reply With Quote