Thread: New Product Change Sun 10 blade 70mm
View Single Post
Old Aug 03, 2012, 03:20 PM
erh7771 is online now
Find More Posts by erh7771
Registered User
United States, TX, Grand Prairie
Joined Nov 2005
6,417 Posts
Quote:
Originally Posted by frank40 View Post
I modified a CS 90 to a 70mm version, I started by cutting the motor mount and the stators out, it was sanded to fit a 70 fan-house that I made of fibreglass. Then I cut the rotor to fit, whit about 0.8 mm spacing to the fan-house wall. I borrowed a 1850KV out runner spec. to max 1600W. ( Still trying to find the right motor). First try with 7 cells gave me 2.1Kg at 2KW... I noted that the air was hot at high power, so I guess the efficiency of the motor is low at this point. The scale was not moving all that well, so after fixing this and with full charged batteries I got 2,6 Kg peak at 2,3KW ( for a very short time)
Pray tell, how were you able to cut the blades down and balance them?

Regards
erh7771 is online now Find More Posts by erh7771
RCG Plus Member
Reply With Quote