Thread: New Product Change Sun 10 blade 70mm
View Single Post
Old Aug 03, 2012, 12:54 PM
frank40 is offline
Find More Posts by frank40
Registered User
frank40's Avatar
Joined Sep 2005
867 Posts
I modified a CS 90 to a 70mm version, I started by cutting the motor mount and the stators out, it was sanded to fit a 70 fan-house that I made of fibreglass. Then I cut the rotor to fit, whit about 0.8 mm spacing to the fan-house wall. I borrowed a 1850KV out runner spec. to max 1600W. ( Still trying to find the right motor). First try with 7 cells gave me 2.1Kg at 2KW... I noted that the air was hot at high power, so I guess the efficiency of the motor is low at this point. The scale was not moving all that well, so after fixing this and with full charged batteries I got 2,6 Kg peak at 2,3KW ( for a very short time)
frank40 is offline Find More Posts by frank40
Reply With Quote