Thread: Discussion 3DHS 58" Edge 540
View Single Post
Old Jul 31, 2012, 01:44 PM
SnowDog1974 is online now
Find More Posts by SnowDog1974
Registered User
SnowDog1974's Avatar
United States, IL, Crystal Lake
Joined Jan 2009
5,892 Posts
Quote:
Originally Posted by Bivens View Post
No paint stirrer on my plane...but I did make a little "shelf" over the batts.....crossing from one side of the motor box to the other...up in the front.

So, basically, I just push the batts (a pair of 3s2600's) up under the shelf...then I use a regular velcro battery strap around the power leads of the battery and battery tray.....they cannot slide rearward when strapped, and the "shelf" over the packs keeps them from raising up. And, I mounted my BEC over the packs up on the shelf....it works really well for me.

Just like the pic below...but I just strap the large red/black wires to the battery tray plywood with one velcro strap to keep them from sliding back.
Sorry Mike for my incorrect attribution; my memory did not serve me well in this case

And thanks for reposting this info.
SnowDog1974 is online now Find More Posts by SnowDog1974
Reply With Quote