Thread: Discussion Duratrax 1/5 DXR 500 superbike
View Single Post
Old Jul 30, 2012, 10:16 AM
slawsonb is online now
Find More Posts by slawsonb
Bruce
Palmdale, CA
Joined Sep 2005
2,862 Posts
Quote:
Originally Posted by gurumods View Post
I have my bike finished for now.Just got done putting on ZH wheels and front brake.The stock servo that came with brake kit didnt work right out of the box,so i replaced it with a futaba s3114.I'm having a little problem with the brakes disc.The pressure point from the servo arm actually hits outside the brake disc diamater and make the discs spread apart in front while being pinched at the back.I shimmed the servo to move it forward right up to the wheel spacer.The wheel spacer has a very thick wall,so if i can find a spacer a little bit thinner wall i can get another 1- 2 mm adjustment by moving the servo more forward.Hope to get some helpful feedback,but this thread is kinda dead.Am i the only person in America with one of these bikes
I will be getting a Spektrum 3 ch radio so i can get the full potential out of this.With stock radio there is no motor brake adjustment,so right now if i apply too much brake it goes into a tank slapper.

Did you modify the brake holder per instructions?

http://2wheelhobbies.com/product_inf...oducts_id=1389
slawsonb is online now Find More Posts by slawsonb
Reply With Quote