View Single Post
Old Jul 27, 2012, 08:10 PM
balsa or carbon is offline
Find More Posts by balsa or carbon
Hot glue held together by foam
United States, WA, Vancouver
Joined Aug 2010
4,146 Posts
Quote:
Originally Posted by electricrc68 View Post
Thanks. I ran it outside and inside....both i thought were pretty loud. I mean, i would hate to loose my flying site due to me making too much noise. Its okay if its not protected...i will try my best to be gentle on the maiden. Do you think that i should get some scrap foam and fill up the prop slot again?

I don't think leaving the prop slot open will make much difference aerodynamically .
If you do make it a puller , it will change where you position the battery because the weight of the motor will be all the way up front . So once the motor is attached to the nose , check the CG ( still need to be 14" straight back down center line ) and place the battery on the fuselage in a spot ( forward or backward ) to get the correct CG , the LOWER ( closest to the ground ) the better to have the most pendulum effect .
balsa or carbon is offline Find More Posts by balsa or carbon
Reply With Quote