View Single Post
Old Jul 23, 2012, 04:23 PM
Daedalus66 is online now
Find More Posts by Daedalus66
60 years of RC flying
Daedalus66's Avatar
Canada, ON, Ottawa
Joined Feb 2006
18,372 Posts
Quote:
Originally Posted by bsbauman View Post
You are a Rockstar!!! Thanks a ton, despite your not being familiar with my radio, I think you got it but I need to check when I get home.

I had the up and downside set at +100/-100, and was having the problem, but I will play with the offset number and see if that does it.

Thanks also for correcting the order of the mix- rud to throttles

You made a happy guy! I will read up on differential thrust; thank you so much!
Don't get too enthusiastic. I'm not sure about how my advice applies to a Futaba.On my JR 9303, all I have to do to get the two channels working in unison is to select INH for AUX 2 to make sure it doesn't respond to a switch or lever. Then I go to one of the programmable mixes and set it to THRO --> AUX2. Bingo, both channels show up on the monitor as moving together.

In retrospect, it may be that all you have to do is to inhibit the channel you are using for THRO2. You may be seeing the effect of a still functioning switch, on top of which the throttle mix input is superimposed.
Daedalus66 is online now Find More Posts by Daedalus66
Reply With Quote