Thread: New Product Change Sun 10 blade 70mm
View Single Post
Old Jul 23, 2012, 01:38 AM
PeterVRC is online now
Find More Posts by PeterVRC
Registered User
Australia, VIC, Melbourne
Joined Nov 2006
13,916 Posts
Here are two more fried - but still running - L2855-2100kv from 6S use.
The left one not running very well anymore....

Battery totals were not even able to run them at the full power they would have drawn if they had more.
eg I can run them a bit harder on the bench if batteries are paralleled to have 'unlimited' Amps available.
So if I had used 40C, or better, batteries they probably would have fried quick smart! (err, even quicker)

It really comes down to watts, fed into them. So as mentioned, you don't really want to be running more than 1000W. Or rather... how many watts (above 900w area) for how long.
So for example you might get away with 1100w in short bursts etc. But they really aren't technically up to the CS10 6S job.

PeterVRC is online now Find More Posts by PeterVRC
Last edited by PeterVRC; Jul 23, 2012 at 01:44 AM.
Reply With Quote