View Single Post
Old Jul 21, 2012, 12:26 AM
blueskysailor is offline
Find More Posts by blueskysailor
Registered User
United States, WA, Shelton
Joined Nov 2010
26 Posts
Thanks Keithm for the tip on the gears. I got two from SDP/SI for my Park Hawk and cut the hubs down to a 3mm height with a drill press and a Dremil cut-off wheel. The drill press made a great horizontal saw. Using the old gear as a template and a "c" clamp in a vise to hold the two gears in phase I drilled the holes in the new gear. It put it back together and test flew it today . Thanks also to Brian for the tips. The Loctite was blue and the screw loosened easily with a Weller dual temp soldering gun . Stay away from sidewalks.
blueskysailor is offline Find More Posts by blueskysailor
Reply With Quote