Thread: Discussion Crius MultiWii AIO boards
View Single Post
Old Jul 18, 2012, 12:50 PM
menace69 is offline
Find More Posts by menace69
Registered User
Joined Jul 2012
4 Posts
I wrote a quick and dirty guide to help beginner's before they tackle the newbie's guide. Coming from the car side of RC, I had no idea what an aileron or elevator was (aren't they in buildings??) so I wrote this up to help me remember--this is very particular for those ordering the kit from goodluckbuy and who are using a stock turnigy 9X radio in mode 2. Feedback is welcome so long as its constructive.

Remember this is to supplement, not replace, the guide at the beginning so you'll need both if you are new to the whole quadcopter thing.

One thing I did wrong was calibrate the esc's to channel 2 (again thinking cars). On start up and in the GUI it would look like it was working but the motors would pulse but never enough to life and it was random--Couldn't figure it out until i pulled all my wires, recalibrated on channel 3 and hooked it all back up--worked fine--until my esc blew up GGRRRRR
menace69 is offline Find More Posts by menace69
Last edited by menace69; Jul 18, 2012 at 12:57 PM.
Reply With Quote