View Single Post
Old Jul 17, 2012, 09:34 PM
shultz is offline
Find More Posts by shultz
Registered User
United States, NV, North Las Vegas
Joined Sep 2009
1,075 Posts
If I understand right you now have the first ESC/motor setup that would not work as your spare? If so, solder a deans or what ever type of battery connector you use to that ESC and solder up the motor, hook the ESC directly to the throttle CH on your receiver(unhook everything else but the BEC) now, without a prop of course plug in your battery and see if the motor spins up... If it does then you know the problem must be at the Power distro...thats if you're sure the solder joints are good

It really sounds like a bad motor>ESC connection or bad phase... with the spare setup doing exactly the same thing it almost has to be a power connection issue or bad distro trace.
shultz is offline Find More Posts by shultz
Reply With Quote