View Single Post
Old Jul 16, 2012, 05:27 AM
EugeneFlorida is offline
Find More Posts by EugeneFlorida
KJ4YYJ
EugeneFlorida's Avatar
Saint Petersburg FL
Joined Jun 2009
779 Posts
Quote:
Originally Posted by neo__04 View Post
Hey all,

Trying to get my fpv setup reliable and bulletproof and have had problems with cheap sunsky video rx and uhf interference.

I ended up getting 2 x new 1.3ghz racewood rx from RMRC to fix this problem.

I just tested them both and with these video RX with my eagletree osd i get a blurring/ streaking of the white of the text across the width of the screen.

if i plug my sunsky rx back in, looks perfect.

Any ideas what this could be? I've attached pics so you can see what i mean.

Thanks heaps!
You May need to change the numbers

Set OSD Text White Level: Adjusts the white level of the OSD Pro text and graphics. Normally, this does not need to be changed from the default
setting of “7.” However, if you see “white streaks” or other anomalies associated with the text display on your video screen, decreasing this value
may help.
· Set OSD Text Black Level: Adjusts the black level of the OSD Pro text and graphics. Normally, this does not need to be changed from the default
setting of “4.” However, if you see “white streaks” or other anomalies associated with the text display on your video screen, increasing this value
may help.
EugeneFlorida is offline Find More Posts by EugeneFlorida
Reply With Quote