View Single Post
Old Jul 15, 2012, 01:01 PM
Kauaiguy is offline
Find More Posts by Kauaiguy
Registered User
United States, HI, Kalaheo
Joined Jan 2011
5,067 Posts
Quote:
Originally Posted by Black_heart View Post
its a little over double 33.5 - 15mm
Here's a question: My Align Dfc head and Tarot Dfc heads are both 16mm.Ive got my servo arms at 12.5 according to the fbl instructions but I'm wondering if Dfc heads follow the two to one rule?Maybe I should try 10mm with the Dfc head?Anyone try that on there 450?I can't go past 12 oclock on the cyclic gain without the shakes but it is working great at 12!On st1 3100headspeed I register no vibs( below 200).I think the single spike shows headspeed and the other number shows total spikes added to total .When I go below or above 3100 I register spikes to 275, also depending on how tight I make my blades I can see improvement .On flight 66 without any problems whatsoever ,best value I ever got!
Answer to my own question is:With the Dfc head you can run 10mm for servo arm distance on the 450, it still falls in the green zone and then I could turn up the gain to two o'clock on both Aile and elev.Still windy here but flight test show it is even more solid.
Steve
Kauaiguy is offline Find More Posts by Kauaiguy
Last edited by Kauaiguy; Jul 15, 2012 at 03:59 PM. Reason: Detail, answer own ?
Reply With Quote