Thread: Discussion Walkera V450D01
View Single Post
Old Jul 12, 2012, 02:54 PM
clearprop88 is online now
Find More Posts by clearprop88
Registered User
Joined Apr 2011
1,886 Posts
[QUOTE=HeliFlyer711;22137020]Nice, Im not familiar with that servo but it must have the slope on the bottom front of the case in order to be a drop in fit. Which pretty much eliminates a lot of the typical square cased servos without cutting the frame/ bearing blocks. Here is a vid of a guy that used Turnigy 90's which are the same as the Tower Pro MG 90's on the V450's Cyclic. Looks like he got the stock geometry right too.


This brings up a really intertesting question.
I checked on the Tower Pro MG90's, and the Turnigy 90's, they're both analog servo's.
If the guy in the video is flying his V450 with analog servo's, and the 2702RX, then the 2702 should work with analog servo's.
clearprop88 is online now Find More Posts by clearprop88
Reply With Quote