View Single Post
Old Jul 10, 2012, 11:47 AM
xandrios is offline
Find More Posts by xandrios
Steven
xandrios's Avatar
United States, CT, East Hartford
Joined May 2010
504 Posts
Hello BrushlesHeaven

pete236 was able to get his Dell A930P-00 (same PSU as KX823) power supply to run for a short time by connecting pins A1 and B6 to ground.

http://www.rcgroups.com/forums/showp...postcount=1018

http://www.rcgroups.com/forums/showp...postcount=1021

http://www.rcgroups.com/forums/showp...postcount=1023

You might want to PM him to see if he was ever able to get it to run properly.


If a no start then try pins A1 and A6 to ground through a 500Ω resistor.
If a no start then try pins A1 and B4 to ground through a 500Ω resistor.
xandrios is offline Find More Posts by xandrios
Last edited by xandrios; Jul 10, 2012 at 11:55 AM.
Reply With Quote